Impro Accredited Training

Sub-Navigation

Introduction
Accreditation Installer - Training Levels
Accreditation Installer - Training Course Structures
>Primary Level Training Information
>Intermediate Level Training Information
>Comprehensive Level Training Information
>Advanced Level Training Information
>Next Training Dates
>Training Booking Form
>Contact Us

[+/-] Introduction

Impro Technologies had now launched a complete Accredited Training Programme aimed at raising the level of installation standards for our products. Market research has shown that Accredited Training has become a high priority to our customers and for this reason we expect all our installers to uphold the prescribed standards.

Coupled with the initial Accredited Training Programme, we have also instituted a re-evaluation process which will ensure that all installers are kept up to date with new features, products and software versions.

Accredited Training has been designed to ensure that installers are trained to the highest standard, with the all skills required to install the ImproX systems with ease and accuracy.

[+/-] Accreditation Installer - Levels

Accreditation Level	Training level	Additional Requirements
Hardware Installation	Optimum Cabling and ImproX Hardware Installation.	None
Intermediate Accreditation	Optimum Cabling and ImproX Hardware Installation. IXP220 Installers and Configuration IXP400 Installers and Configuration	Successful installation of at least 3 IXP220 or IXP400 sites.
Comprehensive Accreditation	Optimum Cabling and ImproX Hardware Installation. IXP220 Installers and Configuration. IXP400 Installers and Configuration. Specific Device and Module Training Competent IT & Networking	Successful installation of at least 3 IXP220 sites Successful installation of at least 2 IXP400 Sites Completion of at least 1 Specific Device & Module Training Course.
Expert Accreditation	Optimum Cabling and ImproX Hardware Installation. IXP220 Installers and Configuration. IXP400 Installers and Configuration Specific Device and Module Training Advanced IXP400 & hardware. Expert IT & Networking	Successful installation of at least 6 IXP220 sites Successful installation of at least 8 IXP400 sites. Attendance of the Extended Module Training after 18months of accreditation.

[+/-] Accreditation Installer - Course Breakdown

Please click on the course breakdown below, to navigate to the relevant course section.
Course breakdown - Click to Navigate

[+/-] Course Information - Primary

Primary Accreditation

This training is designed for initial team members who would either sell the ImproX hardware or install the ImproX hardware.
This foundation level must be carried out correctly in order to ensure that the development of the site is firm and stable.

Impro Technologies Dynamic Sales Level 1
Half Day / 4 hours

An Attendance Certificate will be awarded to all attendees.

Optimum Cabling and ImproX Hardware Installation Training
Level 1
One Day / 8 hours

On successful completion of the assessment the installer will be awarded with a Performance Certificate and may proceed to level 2 courses.

[+/-] Course Information - Intermediate

Intermediate Accreditation The Intermediate level is a crucial building block for the site. Software needs to be configured correctly and software technicians must be confident in the fact that the primary installation has been completed correctly.
Impro IXP220 v1.8 Installation and Configuration � Level 2 One Day / 8 hours	On successful completion of the assessment the installer will be awarded with a Performance Certificate. Once additional requirements have been achieved (Successful installation of at least 3 IXP220 or IXP400 sites), the installer and may proceed to alternative level 2 courses.
ImproNet IXP400 v7.6 Installation and Configuration � Level 2 Three Days / 24 hours	On successful completion of the assessment the installer will be awarded with a Performance Certificate. Once additional requirements have been achieved (Successful installation of at least 3 IXP220 or IXP400 sites), the installer may proceed to the level 3 training courses and apply for level 2 accreditation.

[+/-] Course Information - Comprehensive

Comprehensive Accreditation The Comprehensive level ensures that the standard of knowledge is maintained from previous levels. Here device specific courses are available.
Specific Device and Software Module Training
ImproNet ImproTouch - IXP400 v7.6 - Level 3 One Day / 8 hours	Performance Certificate will be awarded on successful assessment of this module. Successful installation of at least 3 IXP220 sites and of at least 2 IXP400 Sites, the installer may proceed to Expert training courses and apply for level 3 accreditation.
Integration with ImproNet - IXP400 v7.6- Level 3 One Day / 8 hours	Performance Certificate will be awarded on successful assessment of this module. Successful installation of at least 3 IXP220 sites and of at least 2 IXP400 Sites, the installer may proceed to Expert training courses and apply for level 3 accreditation.
Building Management with 3^rd Party Devices - IXP400 v7.6 - Level 3 One Day / 8 hours	Performance Certificate will be awarded on successful assessment of this module. Successful installation of at least 3 IXP220 sites and of at least 2 IXP400 Sites, the installer may proceed to Expert training courses and apply for level 2 accreditation.
ImproNet IXP400 Extended Modules � New Products and Refresher Training for Re-Accreditation - Level 3 Half Day / 6 hours		This course is designed to keep Level 2 and Level 3 Accredited Installers updated with new products and features. This course must be attended every 18 months in order for installers to maintain their Accreditation. Module 1: New Features in ImproNet v7.6 Module 2: Introduction to IXP220 Content is valid until 01 August 2009

[+/-] Course Information - Advanced

Advanced Accreditation:

This level proceeds to expand the site and system to its full capacity. 3^rd Party devices are integrated into

Impro Modules allowing optimum system capacity.

ImproNet IXP400 Advanced Configuration � Level 4
One Day / 8 hours

Module 1: ImproSense Module integration

Module 2: ImproTouch Module integration

Module 3: Linux Integration

Module 4: Custom Reports

Module 5: Troubleshooting

Module 6: New Features and Service packs

On successful completion of the assessment the installer will be awarded with a Performance Certificate. Once additional requirements have been achieved (Successful installation of at least 6 IXP220 sites and successful installation of at least 8 IXP400 sites), the installer may apply for level 4 accreditation. All accreditation is valid for 18 months and will be renewed once the installer attends the Extended Module Training after 18months of accreditation.

[+/-] Training Dates

Please click here to download the Accredited Training Courses schedule.
back to top

[+/-] Booking Form

Jun 08-10 IXP400 Installers and Configuration Course Johannesburg Regional OfficeJune 2010Jun 14 Optimum Cabling and Hardware Installation Johannesburg Regional OfficeJun 15 IXP220 Installers and Configuration Course Johannesburg Regional OfficeJun 17 IMPRONET Operator Skills Johannesburg Regional OfficeJun 18 Dynamic Sales Skills Johannesburg Regional OfficeJun 14 Optimum Cabling and Hardware Installation Durban Head OfficeJun 15 IXP220 Installers and Configuration Course Durban Head OfficeJun 17 IMPRONET Operator Skills Durban Head OfficeJun 18 Dynamic Sales Skills Durban Head OfficeJun 21 Optimum Cabling and Hardware Installation Johannesburg Regional OfficeJun 22-24 IXP400 Installers and Configuration Course Johannesburg Regional OfficeJun 21 Optimum Cabling and Hardware Installation Durban Head OfficeJun 22-24 IXP400 Installers and Configuration Course Durban Head OfficeJun 28 Specific Device Modules: Biometrics Johannesburg Regional OfficeJun 28 Specific Device Modules: Biometrics Durban Head OfficeJun 29 Advanced System Configuration Durban Head OfficeJuly 2010Jul 05 Optimum Cabling and Hardware Installation Durban Head OfficeJul 06-08 IXP400 Installers and Configuration Course Durban Head OfficeJul 05 Optimum Cabling and Hardware Installation Johannesburg Regional OfficeJul 06-08 IXP400 Installers and Configuration Course Johannesburg Regional OfficeJul 14 IXP220 Installers and Configuration Course Johannesburg Regional OfficeJul 15 IMPRONET Operator Skills Johannesburg Regional OfficeJul 16 Dynamic Sales Skills Johannesburg Regional OfficeJul 14 IXP220 Installers and Configuration Course Durban Head OfficeJul 15 IMPRONET Operator Skills Durban Head OfficeJul 16 Dynamic Sales Skills Durban Head OfficeJul 19 Optimum Cabling and Hardware Installation Johannesburg Regional OfficeJul 20-22 IXP400 Installers and Configuration Course Johannesburg Regional OfficeJul 19 Optimum Cabling and Hardware Installation Durban Head OfficeJul 20-22 IXP400 Installers and Configuration Course Durban Head OfficeJul 26 Specific Device Modules: Biometrics Johannesburg Regional OfficeJul 26 Specific Device Modules: Biometrics Durban Head OfficeJul 27 Advanced System Configuration Durban Head Office Please click here to download the Accredited Training Booking Form.

back to top

[+/-] Contact Us

Please email wendyd@impro.net for further info regarding Training Courses available and Booking details.

back to top