ImproX IXP400i Ethernet Advanced Controller (ECII)

---

[Product Code: XEC900-1-0-GB]

 

---

 

IXP400i Ethernet Controller LAN/WAN & RS485 Connectivity

• Extruded aluminium cabinet with built in 6 V 3 Ahr backup battery.
• Dynamically allocated Tag / Transaction memory:
  • Up to 300 000 tag holders, and
  • Up to 1 000 000 buffered transactions.
• ARM920T processor with Linux Operating System allowing native Ethernet communication.
• Communicates with terminals using the RS485 Terminal Bus.

Note: The IXP400i Ethernet Controller must be connected to the Ethernet Registration Interface.

 

Note: The IXP400i Ethernet Controller ECII is also available housed with the ImproX IPS (IPS970-0-0-GB).

 

Hardware

• ARM920T Microprocessor Core operating at 200 mips (million instructions per second).
• Linux Operating System.
• 64 MB SDRAM Memory.
• 8 MB Flash Memory.
• LED's indicate transmit and receive line activity for diagnostics.
• A Real Time Clock (RTC) with a 3 V Lithium Backup Battery (providing 5 years stand-by operation).
• Remote Firmware download capability.
• Supports a secure logon when changing Controller Configuration settings using the Ethernet Discovery Utility software.
• An Ethernet Controller Port for connection to an Ethernet Switch or Hub (or other network device).
• An RS485 Controller Bus Port for connection to other ImproX (ECII) Ethernet Controllers.
• An RS485 Terminal Bus Port for connection to up to 64 Terminal Fixed Addresses.
• Operation from power inputs in the range 10 V DC to 30 V DC.
• Configurable, dynamic memory capable of storing up to 300 000 Tags and up to 1 000 000 buffered transactions.
• Robust, aluminium enclosure.
• Fully incorporated uninterrupted Power Supply with trickle charge and battery management.
• Incorporated 6 V 3 Ahr sealed lead acid battery providing 6 hours full operation.
• Power Input Fail and Battery Low signal reporting.
• 48 Hour Hibernation Mode for extended battery backup of the ImproX (ECII) Ethernet Controller's database (including transactions).

 

When used with ImproNet V7.4 Software

• Tags per person: 8.
• Tagholder Access Groups per Tag: 10.
• Access Groups total: 10 000.
• Active System Events: 8 000.
• Actions: 50 000.

RELATED PRODUCTS

 

The Controller boasts both an RS485 Controller Port (Port 1) and an Ethernet Port allowing use of either.

When connected to the Ethernet Port, the Controller offers communication speeds and capacity not yet seen in similar systems.

Terminals are connected to this controller which enables the access control system to function to its full potential. These are:

• ImproX MfT - Multi-functions Terminal
• ImproX TT - Twin Antenna Terminal
• ImproX TRT - Twin Remote Terminal
• ImproX I/O Terminals - Input/Output Terminals
• ImproX UHR (RF) - 4-channel UHF Receiver - Long Range
• ImproX TA - Time and Attendence Terminal

Attached to the above listed terminals are products such the antennas and Wiegand, Mifare and Biometric readers.

 

APPROVALS

• CE Approved.
• FCC Approval pending.

---

 

Firmware

IXP400i Controller modified on 6/10/10 File type: Firmware

IXP400i Controller modified on 8/3/11 File type: Firmware

IXP400i System Controller (ECII) Firmware modified on 3/6/11 File type: Firmware

Manual

ImproNet Custom Reports Quick Start Guide modified on 5/10/10 File type: Manual

ImproNet Software Quick Start Guide modified on 5/10/10 File type: Manual

ImproX ECII Ethernet Controller modified on 1/8/11 File type: Manual

Product Releases

IXP400i Unlock Code Matrix added on 2/7/10 File type: Product Releases

Product Info 125kHz Antenna Readers modified on 28/6/10 File type: Product Releases

Product Info Hardware ImproX IPS modified on 19/5/10 File type: Product Releases

Product Info ImproTouch Safran Morpho IXP400i modified on 10/9/10 File type: Product Releases

Product Info ImproX iTRT 2nd Generation Intelligent Twin Reader Terminal modified on 28/6/10 File type: Product Releases

Product Info ImproX iTT 2nd Generation Intelligent Twin Terminal modified on 28/6/10 File type: Product Releases

Product Info IXP400i Alarm Arming modified on 29/6/10 File type: Product Releases

Product Info IXP400i CaddX Alarm Arming modified on 29/6/10 File type: Product Releases

Product Info IXP400i CCTV Integration modified on 8/6/10 File type: Product Releases

Product Info IXP400i ECII SMS messaging modified on 29/6/10 File type: Product Releases

Product Info IXP400i Elevator Control modified on 2/7/10 File type: Product Releases

Product Info IXP400i Graphics User Interface modified on 29/6/10 File type: Product Releases

Product Info IXP400i System Controller (ECII) modified on 29/6/10 File type: Product Releases

Product Info IXP400i Texecom Alarm Arming modified on 29/6/10 File type: Product Releases

Product Info IXP400i v 7.66 (SP6) added on 6/10/10 File type: Product Releases

Product Info IXP400i v7.65 Software Overview modified on 24/6/10 File type: Product Releases

Product Info IXP400i Virtual IO modified on 8/6/10 File type: Product Releases

Product Info IXP400i Web based QuickTag modified on 29/6/10 File type: Product Releases

Product Info IXP400i Ziton Fire Alarm Panel modified on 29/6/10 File type: Product Releases

PSC

ImproNet Software Product Specification Catalogue modified 1 week, 1 day ago File type: PSC

ImproX ECII Ethernet Controller modified on 1/8/11 File type: PSC

Sales and Technical

IXP400i Technical Brochure 2010 modified on 8/6/11 File type: Sales and Technical